TCT Saw Blade consists of numerous parameters, these kinds of as tooth profile, angle, number of teeth, the ply of circular saw, blade diameter, the variety of TCT etc which decide the processing capacity and cutting performance in the saw blade. Understand that you'd far better decide on the right parameter of saw blade according to the requirements.

The frequent utilised tooth profiles have even tooth, Dou tooth, ladder-shaped tooth etc, during which the even tooth is popular. Primarily employed in typical wood sawing, this sort of tooth profile is easy and rough inside the saw bite, producing the groove bottom lever easy in the slot process operation. Even though the Dou tooth saw blade is nice at cutting the saw bite, ideal in cutting a myriad of synthetic board and overlay. As intended for the ladder-shaped tooth saw blade, it truly is adequate intended for cutting overlay and fire-proof plate which can get comparatively high saw cutting high quality.

The angle of saw tooth, the cutting situation of saw tooth, can mirror the cutting affect of overall performance during which the largest kinds are rake angle γ, relief angle α and

wedge angle β. As the digging angle of saw tooth, rake angle is usually between 10-15°despite the fact that the larger the rake angle, the more brisk the cutting is.

As the intersection angle from the saw tooth and the processed material, the relief angle is aimed to prevent the friction between them. The larger the relief angle is, the smaller the friction is and the brighter the processed production is. Usually the relief angle of TCT saw blade is 15°.

Deriving through the rake angle and relief angle, the wedge angle should not be too small which takes the role of keeping the intensity, radiation capability and durability of saw tooth. The sum with the above three angles should be 90°.

Usually speaking, the more the number of tooth, the larger the cutting blade per unit time. What's more, the cutting efficiency will be much better with more saw teeth. However, it demands more quantity of TCT which means that the price of the diamond saw blades is higher. The too close saw tooth make the capacity of tooth become smaller and increase the friction of between workpiece which will have an effect on the service life of blade. Usually the insert spacing is between 15 and 25mm, choosing the reasonable variety of tooth according on the material of saw.

In theory, the thinner the saw bit is , the much better. Actually, saw seam is a variety of consumption. The thickness of saw blade is decided by the material of TCT saw blade and the craftsmanship of saw, chosen in the consideration of stability of saw and cutting materials.

Related with the utilized cutting equipment and the thickness of cutting workpiece, the diameter of saw is small which could lead for the reasonably low cutting speed. If it truly is big, the cutting efficiency will be improved but with greater requirement of saw and cutting equipment.

Teeth shape, angle, teeth variety, thickness, diameter and the range of TCT make up a whole TCT Saw Blade which can be given fully play if chosen and matched reasonably.